|  Pipe Hangers and Support Systems - R. H. Keleher Company
Threaded Accessories - R.H. Keleher Company
Threaded products are designed to reduce installation time. Various types and sizes are available for numerous applications.
Threaded Accessory Materials: Carbon Steel, Forged Steel, and Malleable Iron are used in the manufacturing
of threaded products. Stainless Steel and other materials are also available.
Threaded Accessory Finishes: Finishes for threaded products are Plain Steel, Electro-Plated Zinc, Hot Dip
Galvanized and other special coatings are also available.
Upper Attachments - R.H. Keleher Company
Hanger attachments are designed to suspend support rods from beams, concrete and other structural surfaces by bolting or welding.
Upper Attachment Material: Carbon Steel and Malleable Iron are used in the manufacturing of upper attachments. Stainless Steel and other materials are also available.
Upper Attachment Finishes: Finishes for hanger attachments in this section are Plain Steel, Electro-Plated Zinc, Hot Dip Galvanized, Red Primer, Plastic Coating and other special coatings are also available.
Brackets
Brackets are designed for support of pipe hanger rod attachments. Brackets offer a suitable means of supporting pipe from a vertical surface.
Bracket Materials: Carbon Steel is mig-welded into bracket assemblies. Stainless Steel and other materials are also available.
Bracket Finishes: Finishes for brackets in this section are Plain Steel, Electro-Plated Zinc, Hot Dipped Galvanized, Red Primer and other special coatings are also available.
Concrete Inserts - R.H. Keleher Company
Concrete inserts are designed to provide a pre-set support point in concrete ceilings, walls, and floors. A variety of inserts with different design loads are available.
Concrete Insert Materials: Carbon Steel and Malleable Iron are used in the manufacturing of concrete inserts. Stainless Steel and other materials are also available.
Concrete Insert Finishes: Finishes for concrete inserts in this section are Plain Steel, Electro-Plated Zinc, Hot Dipped Galvanized, Red Primer and other special coatings are also available.
Supports, Guides, Shields and Saddles - R.H. Keleher Company
Pipe supports are designed to support pipe from a base structure where vertical adjustments may be necessary. Pipe guides and slides are designed to allow longitudinal movement due to thermal expansion and contraction
of pipe. Protection shields and saddles are designed to prevent damage to pipe insulation.
Pipe Support Materials: Carbon Steel is used in the manufacturing of pipe supports, guides, shields and saddles. Stainless Steel and other materials are also available.
Pipe Support Finishes: Finishes for pipe supports in this section are Plain Steel, Electro-Plated Zinc, Hot Dipped Galvanized, Red Primer and other special coatings are also available.
Pipe Support Notes: All hangers in this section are sized to fit schedule 40/80 pipe unless otherwise noted. Some steel items may be specially fabricated to accommodate other pipe diameters. Products in this section are designed and manufactured in accordance with industry standards. RHK is not responsible for injuries and damage which could result from improper and negligent installation of the items.
Pipe Rollers + Pipe Supports - R.H. Keleher Company
Pipe rollers are designed to accommodate for longitudinal movement due to the expansion and contraction of both insulated and non-insulated pipe.
Pipe Rollers and Pipe Supports Material: Carbon Steel and Cast Iron rollers are used in the manufacturing of pipe
roller supports. Stainless Steel and other materials are also available.
Pipe Rollers and Pipe Supports Finishes: Finishes for pipe supports in this section are Plain Steel, Electro-Plated Zinc,
Hot Dipped Galvanized, Red Primer, Plastic Coating, Stainless Steel and other special coatings are also available.
Pipe Clamps - R.H. Keleher Company
Pipe clamps are designed for support and attachment of pipe to structural steel. Various types of pipe clamps and sizes are available for numerous applications.
Pipe Clamp Materials: Carbon Steel is used in the manufacturing of riser and pipe clamps.
Stainless Steel and other materials are also available.
Pipe Clamp Finishes: Finishes for pipe supports in this section are Plain Steel, Electro-Plated Zinc, Hot Dipped Galvanized, Red Primer, Plastic Coating, Copper Plated, Stainless Steel and other special coatings are also available.
Pipe Clamp Notes: All hangers in this section are sized to fit schedule 40/80 pipe unless otherwise
noted. Some steel items may be specially fabricated to accommodate other
pipe diameters. Products in this section are designed and manufactured in accordance
with industry standards. RHK is not responsible for injuries and damage
which could result from improper and negligent installation of the items.
Pipe Hangers - R.H. Keleher Company
Pipe hangers presented in this section are designed to support insulated or noninsulated pipe allowing for vertical adjustment and limited movement in the piping system.
Pipe Hanger Materials: Carbon Steel, Malleable Iron, 304 and 316 Stainless Steel are used in the
manufacturing of riser and pipe clamps. Other materials are also available.
Pipe Hanger Finishes: Finishes for pipe supports in this section are Plain Steel, Electro-Plated
Zinc, Hot Dipped Galvanized, Red Primer, Plastic Coating, Copper Plated, Stainless
Steel and other special coatings are also available.
Beam Clamps - R.H. Keleher Company
Beam clamps presented in this section are designed to provide attachment of hanger rods to structural steel without drilling or welding. Various types of beam clamps and sizes are available for numerous applications.
Beam Clamp Materials: Carbon Steel, Malleable Iron and Forged Steel are used in the manufacturing
of beam clamps. Other materials are also available.
Beam Clamp Finishes: Finishes for beam clamps in this section are Plain Steel, Electro-Plated
Zinc, Hot Dipped Galvanized, Red Primer, Plastic Coating, Stainless Steel and other
special coatings are also available.
Beam Clamp Notes: See MSS SP-69 for recommended setscrew torque. Products in this section
are designed and manufactured in accordance with industry standards. RHK is not
responsible for injuries and damage which could result from improper and negligent
installation of the items.
Residential Hangers - R.H. Keleher Company
Pipe supports presented in this section are our residential hangers. Hangers in this section are typically used in light duty application in condo or private residences.
Residential Hangers Materials: Carbon Steel is used in the manufacturing of beam clamps. Other materials are also available.
Residential Hangers Finishes: Finishes for beam clamps in this section are Plain Steel, Electro-Plated Zinc and other special coatings are also available.
Residential Hangers Notes: See MSS SP-69 for recommended setscrew torque. Products in this section are designed and manufactured in accordance with industry standards. RHK is not responsible for injuries and damage which could result from improper and negligent installation of the items.
|
| |
